Figure 1 Product overview
1 Delivery tube—Use a straight delivery
tube for hand-held titration. Use a right-
angle (90°) delivery tube when the digital
titrator is attached to a laboratory stand.
5 Delivery knob—Turn to slowly move the
plunger toward the cartridge to push
titrant out of the delivery tube.
2 Titration cartridge 6 Plunger release button—Push and move
forward to move the plunger toward the
cartridge. Push and move backward to
retract the plunger.
3 Counter reset knob—Turn to set the
digital counter back to zero.
7 Handgrip
4 Digital counter 8 Cartridge insertion slot
2.5 Product components
Make sure that all components have been received. Refer to Figure 2. If any
items are missing or damaged, contact the manufacturer or a sales
representative immediately.
Figure 2 Product components
1 Digital titrator (1690001) 2 Delivery tubes (5x)
(1720500)
3 Case (4660200)
English 5
To Next Page
Loading...
