Figure 7 Keypad
1 Power On/Off 6 Main Menu
2 OK 7 Underscore or decimal
3 Up and Down arrows 8 Backspace
4 Quick Jump 9 Alpha-numeric
5 Right and Left arrows 10 Previous menu
Table 1 Key description
Key Description
Power On/Off Energizes and de-energizes the meter.
OK Confirms an entry or highlighted menu option.
Up and Down arrows Moves up or down in the display. If the cursor is at the top or bottom of the display, the
cursor wraps to the bottom or top when the UP or DOWN arrow is pushed.
Quick Jump In normal operation, this key jumps to the Select conduit shape screen.
If the auto-zero feature is disabled, hold this key for five seconds to do a manual zero of
the depth sensor.
In Real-Time mode, the Quick Jump key toggles between the digital and graph views.
Right and Left arrows Moves to the right or left in the display.
Main Menu Moves to the Main Menu from any submenu or screen.
Underscore or decimal Puts in an underscore or decimal character. In numeric-only fields, this key automatically
puts a decimal point in the cursor position.
Backspace Moves the cursor back one space.
Alpha-numeric Puts in the key alpha or numeric value. Values are put in the order shown on the key.
After 2 seconds, the value shown in the display is stored and the cursor advances.
Previous menu Moves to the previous screen.
Status bar
A status bar is shown in the top of the display. Descriptions of the information in the status bar are
given in Table 2.
14
English
To Next Page
Loading...
