Option Description
Setup Allows the user to modify the main filter parameters and enable and program the Maximum
Depth sensor positioning feature. The Maximum depth feature allows a user to enter system
parameters for depth measurement in Real Time mode. The user can choose to enter a
maximum depth value taken directly with a ruler measurement (manual), or taken indirectly
with the depth measurement (automatic). Both methods enable the Maximum Depth sensor
positioning feature.
In automatic mode setup, the user directly enters the distance from the bottom of the channel
to the bottom of the sensor mount (offset). The setup interface will continuously show the
current depth value returned by the sensor plus the offset. The meter stores this value as the
Maximum Depth when the OK button is pushed. In all other cases, the depth values shown do
not include the offset.
The Maximum depth feature requires a sensor with velocity plus depth.
Files or
View
Shows a summary of each real-time file stored in non-volatile memory. Files can be
individually viewed and deleted.
Figure 8 Real time screen
16 English
To Next Page
Loading...
