Need help?Do you have a question about the Hach HQ1130 and is the answer not in the manual?
General| Brand | Hach |
|---|---|
| Model | HQ1130 |
| Category | Measuring Instruments |
| Language | English |
Provides essential safety guidelines and warnings for operating the equipment.
Explains the meaning of hazard symbols (Danger, Warning, Caution, Notice) used in the manual.
Instructs users to read all labels and tags attached to the instrument.
Identifies and lists the various components included with the meter.
Outlines the certifications and standards the product complies with.
Details the functionality and use of the optional Hach Communication Dongle.
Specifies the intended applications and users for the HQ Series portable meters.
Details fire and explosion hazards associated with lithium batteries and safety precautions.
Guides on how to install and remove the meter's rechargeable lithium-ion battery.
Instructions for charging the meter's battery using the supplied USB cable and adapter.
Steps to power on the meter and ensure it starts correctly.
Procedure for selecting the display language upon initial startup or battery installation.
Steps to configure the meter's date and time settings.
Instructions on how to connect a probe to the meter for operation.
Describes the elements and functions displayed on the meter's home screen.
Explains the function of each key on the meter's keypad.
Details the structure and options available within the meter's main menu.
Outlines the steps for measuring samples using different modes (Push to read, Interval, Continuous).
Provides guidance on calibrating the connected probe's performance.
Explains how to verify the accuracy of a probe's calibration.
Explains how to assign and save sample IDs with measurement data.
Explains how to assign and save user IDs with measurement and calibration data.
Details settings for pH probe measurements, calibration, and verification.
Outlines settings for ORP probe measurements, calibration, and verification.
Explains settings for conductivity probe measurements, calibration, and verification.
Covers settings for LDO or LBOD probe measurements, calibration, and verification.
Details settings for ISE probe measurements, calibration, and verification.
Describes how to set a PIN to prevent unauthorized changes to meter settings.
Guides on how to download and install software updates for the meter.
Shows how to access detailed information about the connected probe.
Displays the meter's model number, serial number, and software version.
Instructions for cleaning the exterior of the instrument.
Guidelines for replacing the meter's battery when needed.
Procedures for preparing the instrument for shipping, including battery handling.
Explains how to use the meter's built-in troubleshooting guides for error messages.
Guides on exporting diagnostic files for technical support or service.
Lists common error messages and their corresponding solutions for the meter.
Lists approved replacement parts for the meter and their item numbers.
To Next Page
