What to do if Hach Measuring Instruments meter will not power on?
If the Hach Measuring Instrument meter won't power on, first ensure the batteries are correctly installed, paying attention to the polarity markings. If that doesn't work, try cleaning the battery terminals and installing new batteries. You can also connect an AC power adapter to test the device.
What to do if Hach Measuring Instruments says probe not supported?
If your Hach Measuring Instruments display a 'Probe Not Supported' error, first ensure the probe is properly connected by tightening the locking nut on the probe connector. If the issue persists, try disconnecting and reconnecting the probe. Also, try connecting a different IntelliCAL probe to the meter to verify if the problem is with the meter or the probe.
General| Brand | Hach |
|---|---|
| Model | HQ30d |
| Category | Measuring Instruments |
| Language | English |
Outlines crucial safety precautions and notices for operating the meter.
Explains the meaning of hazard symbols and warnings for user safety.
Details specific symbols and their meanings for safe instrument operation and maintenance.
Step-by-step guide for correctly installing batteries in the meter.
Instructions for connecting the meter to an AC power source using the adapter.
Procedure for powering the meter on and off, including troubleshooting tips.
Guides the user on how to properly connect a probe to the meter.
Instructions on how to access and view logged sample, calibration, and check standard data.
Details how to retrieve calibration data and history stored directly on the connected probe.
How to set up password protection and restrict access to meter settings.
Steps to enable and configure security features for meter setup.
Procedure for replacing the meter's AA batteries, including safety warnings.
To Next Page
