What to do if Hach HQ11d Measuring Instruments meter will not power on?
If the Hach Measuring Instrument meter won't power on, first ensure the batteries are correctly installed, paying attention to the polarity markings. If that doesn't work, try cleaning the battery terminals and installing new batteries. You can also connect an AC power adapter to test the device.
What to do if Hach HQ11d Measuring Instruments says probe not supported?
If your Hach Measuring Instruments display a 'Probe Not Supported' error, first ensure the probe is properly connected by tightening the locking nut on the probe connector. If the issue persists, try disconnecting and reconnecting the probe. Also, try connecting a different IntelliCAL probe to the meter to verify if the problem is with the meter or the probe.
General| Type | Portable pH meter |
|---|---|
| Device Type | Digital pH meter |
| Parameter | pH and temperature |
| pH Resolution | 0.01 pH |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.5 °C |
| Operating Temperature | 0 to 50 °C |
| Display | LCD |
| IP Rating | IP67 |
| Warranty | 2 years |
| pH Range | 0.00 to 14.00 pH |
| Temperature Range | -5.0 to 105.0°C |
| Calibration Points | Up to 3 points |
Overview of product, safety, and hazard information.
Important safety notices, warnings, and precautions for safe operation.
Details the meaning of hazard symbols and warnings.
Information on labels attached to the instrument and their meaning.
Describes the HQd series portable meters and their key features.
Identifies the physical parts and accessories of the meter.
Step-by-step guide for inserting batteries into the meter.
Instructions for powering the meter using an AC adapter and cable.
Explains the keypad layout and general interface elements.
Details the information shown on the meter's various display screens.
Guides on how to move through menus and select options using keys.
Explains the importance and procedure for probe calibration for accuracy.
Guidance on taking and performing sample measurements with the meter.
How to use check standards to verify meter accuracy and performance.
Assigning unique IDs to samples for data traceability and organization.
Assigning unique IDs to operators for data traceability and logging.
Instructions for powering the meter on and off correctly.
Procedure to select the desired display language for the meter interface.
Steps to set the meter's internal date and time for accurate logging.
Steps to properly connect a probe to the meter for measurements.
Information on the types of data logged and storage capacity limits.
How to access and review logged sample, calibration, and check standard data.
Accessing calibration history and current calibration data from connected probes.
Instructions for printing logged data to a compatible printer.
Customizing the format and content of printed reports.
Transferring logged data from the meter to a USB storage device.
How to import and view data files on a computer using spreadsheet software.
Steps to omit column headers when exporting data for spreadsheet compatibility.
Transferring data in real-time or from the log to a PC.
Setting up security features to protect meter setup and method settings.
Activating and configuring security features and password protection.
Accessing all meter settings and configuration options.
Accessing limited options when security is enabled for operators.
Adjusting screen contrast, backlight, and detailed or big reading screen modes.
Configuring audible alerts for key presses, stability, and calibration reminders.
Setting up notifications for probe calibration due dates and reminders.
Switching between Celsius and Fahrenheit for temperature readings.
Selecting between Press-to-Read, Interval, and Continuous measurement modes.
Configuring time intervals and duration for interval measurement sessions.
Initiating and managing timed interval measurement sessions.
Strategies to avoid data loss during interval measurements due to storage limits.
Accessing details about the meter and connected IntelliCAL probes.
Procedure for updating the meter's firmware using a USB storage device.
Instructions on where to find and how to obtain the latest software updates.
Copying and importing user-defined method settings between meters via USB.
Using the meter for automated data transfer and remote control via PC.
Controlling meter functions and operations remotely from a PC.
Setting up the meter for PC communication, including virtual serial port.
Basic cleaning instructions for the meter's exterior surfaces.
Essential guide for replacing the meter's batteries safely and correctly.
Table of common issues, causes, and corrective actions for meter problems.
List of available spare parts and their corresponding item numbers.
Explanation of the structure and content of the report header.
Overview of basic, advanced, and total report formats for sample data.
Details the format of reports generated for check standard measurements.
Information on the data included in calibration reports and their format.
To Next Page
