Need help?Do you have a question about the Hach HQ2200 and is the answer not in the manual?
General| Connectivity | USB |
|---|---|
| Parameters Measured | pH, ORP, Conductivity, Temperature |
| Accuracy | ±0.002 pH |
| ORP Range | -2000 to +2000 mV |
| Temperature Range | -5 to 105 °C |
| Display | LCD with backlight |
| Data Storage | 500 data sets |
| Power Supply | 4 AA batteries or AC adapter |
| IP Rating | IP67 |
| Operating Temperature | 0 to 50 °C |
| Inputs | pH, ORP, Conductivity, Temperature |
Provides critical safety information and warnings for using the meter and its accessories.
Details fire and explosion hazards associated with lithium batteries and safety precautions.
General steps for measuring samples using Push to read, Interval, or Continuous modes.
Procedure for calibrating a connected probe using buffer or standard solutions.
Steps to verify the accuracy of a probe's calibration using standard solutions.
Configure measurement, calibration, and verification settings for pH probes.
Configure measurement, calibration, and verification settings for ORP probes.
Configure measurement, calibration, and verification settings for conductivity probes.
Configure measurement, calibration, and verification settings for LDO/LBOD probes.
Configure measurement, calibration, and verification settings for ISE probes.
Instructions for exporting measurement, calibration, and verification data to a PC or USB drive.
How to set a PIN to prevent unauthorized changes to meter and probe settings.
To Next Page
