Specifications Details
Temperature accuracy ±0.3 °C (±0.54 °F)
Operating temperature 0 to 80 °C (32 to 176 °F)
Storage temperature 5 to 40 °C (41 to 104 °F)
Minimum immersion depth 20 mm (0.79 in.)
Body material (standard) Epoxy
Body material (field rugged) Epoxy/stainless steel
Reference potential versus
Standard Hydrogen Electrode
207 mV at 25 °C
Electrolyte Non-refillable gel reference element
Storage solution Hach pH electrode storage solution
1
or 3 M KCl
Cable connection M12 digital output and connector
Dimensions Diameter: 12 mm (0.47 in.)
Length: 175 mm (6.9 in.) total; 103 mm (4.1 in.) below head
Cable length: MTC10101: 1 m (3.3 ft); MTC10103: 3 m (9.8 ft)
Dimensions (rugged) Diameter: 46 mm (1.8 in.)
Length: 223 mm (8.7 in.)
Cable length: MTC10105: 5 m (16.4 ft); MTC10110: 10 m
(32.8 ft); MTC10115: 15 m (49.2 ft); MTC10130: 30 m (98.4 ft)
Warranty 6 months on the probe. This warranty covers manufacturing
defects, but not improper use or wear.
Certifications CE, FCC/ISED
Section 3 Safety information
3.1 Intended use
The Intellical probes are intended for use by individuals who measure water quality parameters in the
laboratory or in the field. The Intellical probes do not treat or alter water.
3.2 Use of hazard information
D A N G E R
Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or
serious injury.
W A R N I N G
Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death
or serious injury.
C A U T I O N
Indicates a potentially hazardous situation that may result in minor or moderate injury.
1
Use of other storage solutions can cause permanent damage to the probe.
4 English
To Next Page
Loading...
Need help?
General
