107
Advanced Operations
If the file was stored the message Instrument Backup is stored to
USB stick will be displayed.
4. Press OK to return to the System Checks menu.
Restore backup data:
Important Note: All current data will be overwritten when restoring
the Backup file!
1. Press Instrument Backup in the System Checks menu.
2. Connect the USB memory stick containing the Backup
(section 3.4 on page 13).
3. Press Restore to pass back the data.
Note: If the USB stick is not connected, the message "Please insert USB
Memory" is displayed. Connect a USB stick, in order to store the data.
Press OK to confirm and press Restore again.
To Next Page
Loading...
