Hach sensION + EC 5 - Sensor Connection; Carrying Case

7
3. Installation
ENGLISH
3.3. Disconnecting/connecting the sensor
The sensION
™
+ EC 5 kits are supplied with the sensor attached to the instrument.
Fig. 3. Disconnecting/connecting the sensor to the measuring instrument
Sensor disconnection
Sensor connection
Important note: do not unscrew the connector.
3.4. Carrying case
The carrying case can be used as a support for both, instrument and sensor, see figure.
Electrode position when
it is not in use.
sensION+ EC5 HACH 0710.indd ANG:7sensION+ EC5 HACH 0710.indd ANG:7 7/9/10 12:50:577/9/10 12:50:57