Need help?Do you have a question about the Hach sensION+ and is the answer not in the manual?
General| Display | LCD with backlight |
|---|---|
| Operating Temperature | 0 to 50 °C (32 to 122 °F) |
| IP Rating | IP67 |
| Temperature Compensation | Automatic or manual |
| Parameter | pH, ORP, Conductivity, Dissolved Oxygen |
| Power Supply | 4 AA batteries |
| Resolution | pH: 0.01; DO: 0.1 mg/L |
| Calibration | Up to 5-point calibration |
Ensure equipment protection is not impaired; use only as specified.
Explains DANGER, WARNING, CAUTION, and NOTICE to indicate potential hazards.
Highlights personal injury risks during installation and requires qualified personnel.
Covers battery warnings, correct installation, and storage notices for safe operation.
Warning about chemical exposure hazards and required safety measures.
Step-by-step guide for calibrating the meter using standard solutions.
Fine-tune calibration to match specific solution values for pH, ORP, conductivity.
Calibrate the temperature sensor for improved accuracy at specific points.
Lists common error/warning messages and their corresponding solutions.
Troubleshoots probe current limits, pH sensitivity, and calibration constant issues.
Addresses cell constant, slope, and buffer recognition errors.
Resolves errors related to calibration solutions, such as using same or different temperatures.
To Next Page
