What to do if Hach SL1000 shows Overrange?
If the Hach Measuring Instruments displays 'Overrange', it means the concentration exceeds the method's upper limit. To resolve this, dilute the sample and measure it again.
Why does my Hach Measuring Instruments say 'Barcode read error'?
If the Hach Measuring Instruments displays 'Barcode read error', it indicates that the Chemkey isn't operating or installed correctly. Try reinserting the Chemkey, using a new one, or cleaning the barcode window.
What to do if Hach SL1000 displays Sample aspirate error?
If the Hach Measuring Instruments displays 'Sample aspirate error', it means the Chemkey isn't working correctly or isn't fully inserted. Try a new Chemkey, ensuring it's fully pushed into the slot.
Why does Hach SL1000 Measuring Instruments say 'Used Chemkey'?
If the Hach Measuring Instruments displays 'Used Chemkey' error, it means the Chemkey has already been used, or there is water in the slot. Use a new Chemkey. If the issue continues, dry the slot and instrument before trying again.
How to fix 'Meter does not detect sample' on Hach SL1000 Measuring Instruments?
If the Hach Measuring Instruments displays 'Meter does not detect sample', ensure the sample cup is filled to the fill line and that the sample conductivity is more than 2 µS/cm.
How to fix 'Low Light. Clean Chemkey slot' error on Hach SL1000?
If the Hach Measuring Instruments displays 'Low Light. Clean Chemkey slot', it indicates that the Chemkey isn't operating or installed correctly. Try reinserting the Chemkey in one push, using a new Chemkey, or cleaning the Chemkey slot.
What to do if Hach Measuring Instruments says 'Insert Chemkey in darker environment'?
If the Hach Measuring Instruments displays 'Insert Chemkey in darker environment. Too much ambient light (1)', it means the ambient light is too high to read the barcode. Move the meter to a darker environment and reinsert the Chemkey into the slot.
Why does Hach SL1000 Measuring Instruments say 'Too much ambient light'?
If the Hach Measuring Instruments displays 'Insert Chemkey in darker environment. Too much ambient light (2)', it means the ambient light is too high to make a valid measurement. Move the meter to a darker environment and measure again.
What to do if Hach SL1000 Measuring Instruments displays Tray Leak?
If the Hach Measuring Instruments displays 'Tray Leak', it indicates a problem with the tray. Replace the tray.
Why does Hach SL1000 Measuring Instruments say 'Tray too cold'?
If the Hach Measuring Instruments displays 'Tray too cold', it means the meter may be too cold to heat the tray, or the heater isn't working. Move the meter to a warmer area and measure again, or replace the tray.
General| Measurement Range | Varies by parameter |
|---|---|
| Resolution | Varies by parameter |
| Accuracy | Varies by parameter |
| Light Source | LED |
| Detector | Photodiode |
| Display | LCD |
| Connectivity | USB, Bluetooth |
| Battery Life | 8 hours |
| Operating Temperature | 0 to 50 °C |
| Measurement Parameters | Chlorine |
| Method | Colorimetric |
| Power Supply | Rechargeable battery |
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols.
Describes the precautionary labels and their referenced symbols.
Details critical safety precautions for handling lithium batteries.
Details the various elements and indicators shown on the measurement screen.
To Next Page
