Table of contents
Specifications on page 3 Startup on page 10 Maintenance on page 16
General information on page 3 Standard operation
on page 10
Troubleshooting on page 18
Installation on page 6 Calibration on page 14 Replacement parts and accessories
on page 21
User interface and navigation
on page 8
Data log on page 15
Additional information
Additional information is available on the manufacturer's website.
Specifications
Specifications are subject to change without notice.
Specification Details
Dimensions (W x D x H) 13.08 x 5.89 x 25.83 cm (5.15 x 2.32 x 10.17 in.)
Enclosure rating IP67 with caps installed for the meter probe connector ports or with
the probes connected to the instrument
Weight 1.2 kg (2.7 lb)
Power requirements (internal) Lithium ion rechargeable battery
Power requirements (external) 100V–240 VAC, 50/60Hz input, 12V at 3A output
Operating temperature 5 to 50 °C (41 to 122 °F), maximum 85% relative humidity (non-
condensing)
Storage temperature –20 to 60 °C (–4 to 140 °F), maximum 85% relative humidity (non-
condensing)
Interface Mini USB port
5-pin input connector Two M12 connectors for IntelliCal
™
probes
External power supply connection 2.5 mm Jack
Chemkey slots 4
Data memory 1000 measured values (result, date, time, site ID, user ID)
Data storage Automatic in Press to Read measurement mode. Manual in
Continuous measurement mode
Temperature correction (for IntelliCal
™
probes)
Off, automatic and manual (parameter dependent)
Measurement display lock (for IntelliCal
™
probes)
Press to Read and Continuous measurement mode
Protection class III
Certifications CE compliant
Warranty 1 year
General information
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
English
3
To Next Page
Loading...
