Figure 5 Measurement screen (lower part)
1 Probe icon, port number, parameter or probe name 8 Active arrow keys
2 Calibration status icon (calibration correct) 9 Site ID icon and site name
3 Secondary measurement value (user-selected
parameter)
10 Routes icon (shows when routes is set to on)
4 Tertiary measurement value (user-selected
parameter)
11 Options (contextual: Details, exit, cancel, select,
deselect)
5 Right and left arrows to select the applicable site ID 12 Primary measurement value (user selected)
6 Options (contextual: Read, select, OK, delete) 13 Stability icon
7 Checkmark: Completed measurement on site
Keypad description
Refer to Figure 6 for the keypad description and navigation information.
Figure 6 Keypad description
1 POWER key 4 RIGHT selection key (contextual): Read samples,
delete, select or confirm options, opens sub-menus
2 MAIN MENU key: Select verification, calibration,
routes, settings, data log, information, diagnostics,
operator ID and site ID
5 Navigation keys UP, DOWN, RIGHT, LEFT
1
: Scroll
through menus, enter numbers and letters.
3 LEFT selection key (contextual): Details,
select/deselect, cancels or exits the current menu
screen to the previous one
6 HOME: Go to the main measurement screen.
1
UP, DOWN: Scroll through measurements when there are more than four measurements, RIGHT, LEFT:
Scroll through operator and sample IDs.
English
9
To Next Page
Loading...
