What causes 'Tray too hot' error on Hach SL1000 Measuring Instruments?
If the Hach Measuring Instruments displays 'Tray too hot', it means the meter is too hot for an accurate measurement. Cool the meter or move it from the warm area.
Why does Hach SL1000 say 'Meter left in sample too long'?
If the Hach Measuring Instruments displays 'Meter left in sample too long', it means the Chemkeys were left in the sample too long, causing a measurement error. Remove the Chemkeys immediately when prompted.
What does 'Remove from sample' mean on Hach SL1000?
If the Hach Measuring Instruments displays 'Remove from sample', it means the meter was placed into the sample prematurely. Wait until the meter is ready before inserting it into the sample.
What to do if Hach SL1000 warns about a dirty sample detector pin area?
If the Hach Measuring Instruments shows the warning about the sample detector pin area being dirty while the meter is not in the sample, clean the sample detector pin area.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols.
Describes the precautionary labels and their referenced symbols.
Details critical safety precautions for handling lithium batteries.
Details the various elements and indicators shown on the measurement screen.
General| Measurement Range | Varies by parameter |
|---|---|
| Resolution | Varies by parameter |
| Accuracy | Varies by parameter |
| Light Source | LED |
| Detector | Photodiode |
| Display | LCD |
| Connectivity | USB, Bluetooth |
| Battery Life | 8 hours |
| Operating Temperature | 0 to 50 °C |
| Measurement Parameters | Chlorine |
| Method | Colorimetric |
| Power Supply | Rechargeable battery |
To Next Page
