6-4 Maintenance
P/N 39551-00, Rev. F
Warning! In order to function properly, the Bowl Optics must
be clean and clear. A dirty or clouded lens on the Bowl Optics
could interfere with its proper function.
Warning! If the cleaning solution should come in contact
with the Bowl Optics, the operator should rinse the lens with
clear water and dry it so that the lens is not clouded.
Mechanical Centrifuge Well and Cover
The Centrifuge Well and Cover should be cleaned monthly as well as any time
a spill occurs. The following cleaning methods are recommended to ensure
proper cleaning and to eliminate harm to machine components.
Figure 6-1 , Mechanical Centrifuge
Bowl Optics
Cover
Fluid Detectors
Mechanical Chuck
Cover Latch
Centrifuge Well
Mechanical Clips
To Next Page
Loading...
Need help?
General
