Notice Messages and Troubleshooting 5-3
P/N 39551-00, Rev. F
For example, as part of the power-on self test, the following display is shown.
In order for the MCS+ device to pass this interlock test, the operator must open
and close the Centrifuge Cover. This confirms that the interlock on the Centrifuge
Cover is functioning properly.
Through the interlock messages, the system monitors the integrity of both the ma-
chine and the disposable.
NOTICE MESSAGES
Notice messages may be initiated by one of two systems that are monitoring the
MCS+ device at all times during operation. Generally, notice messages are indi
-
cations of situations that can easily be corrected by the operator.
SELF TEST
PLEASE CLOSE THE CENTRIFUGE COVER LATCH
Press HELP for More Information.
SDPS
SELF TEST
470
SDPS
ACAD DETECTS AIR
Filling Bowl
Press NO to Mute the Alarm.
ANTICOAGULANT AIR DETECTOR
Press HELP for More Information.
Type of
Hints
Descriptio
of Problem
Problem
175
Message
DRAW
Number
To Next Page
Loading...
Need help?
General
