Häfele ER4800 - Mode Changing Procedures; Switching from Normal to Safety Mode; Switching from Safety to Normal Mode

Before Using
Note
˙
Existing secret code, card
are deleted automatically
after registration of new
manager code.
˙
Only one of manager code
can be registered
with 6 ~ 12 digits.
˙
Manager code & manager
card shall be controlled by
authorized person for security.
˙ After input manager code
which was used at safety
mode and press [#],
all code/card which were
registered at safety mode
shall be deleted.
Newly registered code is
for usage at normal mode.
˙ Max. 10EA of Secret code
can be registered
with 6 to 12 digits.
˙ Previous code is deleted
automatically with registration
of new code.
˙ Please do the change /
registration of new code at
door opened status to prevent
unintentional locking.
˙ After changing secret code,
please verify it by unlocking
with new secret code.
How to change mode (Normal mode Safety mode)
˙ To register multiple code,
input new secret code and
press successively.
Open battery cover.
Press [10Key] button
for 5 sec. (Bik~Bik~)
Enter Manager Code.
(Ex : 456789)
Enter
New Secret Code.
(Ex : 123456)
Press [ # ]
(Brik~Brik~)
Press [ # ]
(Briririk~)
Enter New Secret
Code again.
(Ex : 123456)
Press [ # ]
(Brik~)
Open battery cover.
Press [R/C] button
for 5 sec. (Bik~Bik~)
Press [ # ]
(Brik~)
Enter Secret Code.
(Ex : 123456)
Enter
New Manager Code.
(Ex : 456789)
Enter New Manager
Code again.
(Ex : 456789)
Press [ # ]
(Brik~Brik~)
Press [ # ]
(Briririk~)