hager EEN003W - User Manual

To Next Page

6LE007146A

EGN200, EGN400

Additional information is

available by scanning the

displayed QR code with

your mobile device.

About the product

EGN200 and EGN400 time switches are electronic

programming clocks with weekly and annual cycles

for automatically controlling different loads.

Examples of applications: street lighting, neon signs,

shop windows, monuments, façades etc.

The built-in astronomical clock can be set to switch

loads according to sunset and sunrise times.

EGN200 and EGN400 switches are also compatible

with the Quicklink Hager range of radio products.

An EEN002 / EEN003 twilight sensor (optional) can

be connected to switch loads depending on the

brightness.

Programming by a mobile device via Bluetooth®

wireless technology is recommended using the

configuration app (iOS and Android) available for free

download.

Mean Features

• Product delivered with day and time set (from

Paris).

• Programming by application via Bluetooth

or local

programming (except annual).

• Backlit screen.

• Automatic Daylight Savings Time adjustment.

• Astronomical mode.

• Programming by day or group of days.

• 200 or 400 program steps (depending on version)

On, Off, pulses .

• Constant forcing to On or Off.

• Temporary On or Off variances.

• Variances (temporary, constant or timed) that can

be enabled remotely using a push button.

• Bar graph for viewing the daily profile for the 2 or 4

channels (depending on the version).

• Programmable when off only via the screen (with

limited functionality).

• Twilight switch function via an EEN002 or EEN003

wired brightness sensor.

When connecting the cell, or before

performing any work on it, cut the 230V

power supply to the clock.

Display and keys

Screen saver

▲

▼

Date

Bluetooth

enabled

Time

Status

of channel

A, B, C, D

(depending

on the

version)

Press to enable the backlight;

press again to view the home screen

Home screen

cfg

Daily

profile bar

graph

Brightness

Time

View the

screen of

manual

commands

(short press)

Change channel

A, B, C or D

(depending on

the version)

Day selection

(cursor)

MTWTFSS

Quicklink

Config.

Channel

being

viewed

Image 1: presentation of screen saver and home

screen

Connection diagrams

Device must only be installed by an electrician

according to applicable standards.

1 Forcing or variance input

2 Brightness sensor

Image 2: EGN200 connection diagram (2 outputs)

1 Forcing or variance input

2 Brightness sensor

Image 3: EGN400 connection diagram (4 outputs)

Technical speciﬁ cations

Electrical speciﬁ cations

• Power supply voltage: 230 V~ +10/-15% and

240V~ ±6%

• Network frequency: 50/60 Hz

• Consumption : EGN200 < 350 mW /

EGN400 < 500 mW

• Output: 2 or 4 non-insulated changeover contacts

(depending on the version)

• Max. break capacity: AC1 μ 16A 230 V~

• Incandescent lamps:

- relay power with contact normally open / 2300 W

- relay power with contact normally closed / 1500

• Halogen lamps: 230 V~ 2300 W

• Compensated fluorescent tubes // (max. 45 μF):

- relay power with contact normally open / 400 W

- relay power with contact normally closed / 300 W

• Uncompensated fluorescent tubes, compensated in

series: 1000 W

• Compact fluorescent lamps and LED lamps:

- relay power with contact normally open / 400 W

- relay power with contact normally closed / 300 W

• Min. break capacity: AC1 100 mA 230 V~

• Rated impulse withstand voltage: 4 kV

• Maximum switching rate at full load: 6 switching

cycles / minute

Functional speciﬁ cations

• Programming capacity: 200 or 400 steps depending

on the model

• Min. time between 2 steps: 1 minute

• Rate accuracy: ± 0.25 sec / day

• The product switches to standby status (display

off): after 1 minute of no power or inactivity.

It returns to auto mode as soon as the voltage

returns or when a key is pressed.

• Bluetooth

radio frequency: 2.4 - 2.483 GHz

- Max. emission power: 10 mW

- Scope: 10 m in free field

- Version: 4.2

• Mobile device / PC configuration

- iOS version no earlier than 8

- Android version no earlier than 5.1

- Windows version no earlier than 10

- Bluetooth

: version no earlier than 4.2

• Quicklink radio frequency: 868 - 870 MHz

- Max. emission power: 25 mW

- Receiver category 2

- Scope: 100 m in free field

• Insulation class: 2

• Action type: 2B

• Software class: Class A

• Ball test temperature: 75 °C

• Upstream protection: 16 A circuit breaker

• Declared voltage and current for ECM emission

test: 230 V~ - 0.5 A

• Protection rating: IP20 (box), IP30 (box under

faceplate)

• Impact resistance: IK04

Battery

• Power reserve: 10 years without any action

• Non-replaceable and non-rechargeable

Hager Mood

Bluetooth

Multi-Function

2-Channel Time Switch

Bluetooth

Multi-Function

4-Channel Time Switch

Main Page

Other manuals for hager EEN003W

Installation4 pages

Need help?

Do you have a question about the hager EEN003W and is the answer not in the manual?

Overview

Bluetooth® Multi-Function 2-Channel / 4-Channel Time Switch (EGN200, EGN400)

Bluetooth® Multi-Function 2-Channel / 4-Channel Time Switch (EGN200, EGN400)

Function Description

The EGN200 and EGN400 time switches are electronic programming clocks designed for automatic control of various loads over weekly and annual cycles. Typical applications include street lighting, neon signs, shop windows, monuments, and façades. These devices feature a built-in astronomical clock that can be configured to switch loads based on local sunset and sunrise times.

The EGN200 and EGN400 switches are also compatible with the Quicklink Hager range of radio products, allowing for integration into broader smart home or building systems. An optional EEN002 or EEN003 twilight sensor can be connected to enable load switching based on ambient brightness.

Programming is primarily facilitated via a mobile device using Bluetooth® wireless technology through a dedicated configuration app, available for free download on both iOS and Android platforms. Local programming is also possible, though with limited functionality for annual cycles.

Important Technical Specifications

Electrical Specifications:

Power Supply Voltage: 230 V~ +10/-15% and 240 V~ ±6%
Network Frequency: 50/60 Hz
Consumption: EGN200 < 350 mW / EGN400 < 500 mW
Output: 2 or 4 non-insulated changeover contacts (depending on the version)
Max. Break Capacity: AC1 μ 16A 230 V~
Incandescent Lamps:
- Relay power with contact normally open: 2300 W
- Relay power with contact normally closed: 1500 W
Halogen Lamps (230 V~): 2300 W
Compensated Fluorescent Tubes (max. 45 µF):
- Relay power with contact normally open: 400 W
- Relay power with contact normally closed: 300 W
Uncompensated Fluorescent Tubes (compensated in series): 1000 W
Compact Fluorescent Lamps and LED Lamps:
- Relay power with contact normally open: 400 W
- Relay power with contact normally closed: 300 W
Min. Break Capacity: AC1 100 mA 230 V~
Rated Impulse Withstand Voltage: 4 kV
Maximum Switching Rate (full load): 6 switching cycles / minute

Functional Specifications:

Programming Capacity: 200 or 400 steps (depending on the model)
Min. Time Between 2 Steps: 1 minute
Rate Accuracy: ± 0.25 sec / day
Standby Status: Display off after 1 minute of no power or inactivity. Returns to auto mode when voltage returns or a key is pressed.
Bluetooth® Radio Frequency: 2.4 - 2.483 GHz
- Max. Emission Power: 10 mW
- Scope: 10 m in free field
- Version: 4.2
Mobile Device / PC Configuration:
- iOS version no earlier than 8
- Android version no earlier than 5.1
- Windows version no earlier than 10
- Bluetooth®: version no earlier than 4.2
Quicklink Radio Frequency: 868 - 870 MHz
- Max. Emission Power: 25 mW
- Receiver Category: 2
- Scope: 100 m in free field
Insulation Class: 2
Action Type: 2B
Software Class: Class A
Ball Test Temperature: 75 °C
Upstream Protection: 16 A circuit breaker
Declared Voltage and Current for ECM Emission Test: 230 V~ - 0.5 A
Protection Rating: IP20 (box), IP30 (box under faceplate)
Impact Resistance: IK04

Physical Specifications:

EGN200 Size: 36 mm / 2 modules
EGN400 Size: 72 mm / 4 modules
Mounting: Surface mounting on DIN rail according to EN 60715
Connection: Screw terminals
- Rigid: 0.2 to 4 mm²
- Flexible: 0.2 to 2.5 mm²
- Screw Impression: PH1

Environmental Specifications:

Operating Temperature: -5 °C to +45 °C
Storage Temperature: -25 °C to +70 °C
Relative Humidity: 95% at 20°C
Pollution Level: 2

Usage Features

General Operation:

Pre-set: Product delivered with day and time set (from Paris).
Programming: Via Bluetooth® application or local programming (except annual cycles).
Backlit Screen: For clear visibility.
Automatic Daylight Savings Time Adjustment: Automatically adapts to time changes.
Astronomical Mode: Switches loads according to sunset and sunrise times.
Programming Flexibility: By day or group of days.
Program Steps: 200 or 400 program steps (depending on version) for On, Off, or pulse functions.
Constant Forcing: Ability to force outputs to On or Off.
Temporary Variances: Temporary On or Off changes.
Remote Control: Variances (temporary, constant, or timed) can be enabled remotely using a push button.
Daily Profile Bar Graph: Visual representation of the daily profile for the 2 or 4 channels.
Limited Local Programming: Programmable when off only via the screen (with limited functionality).
Twilight Switch Function: Via an EEN002 or EEN003 wired brightness sensor.

Display and Keys:

Screen Saver: Displays date, time, and status of channels (A, B, C, D). Press any key to enable backlight and view the home screen.
Home Screen: Shows daily profile bar graph, Bluetooth® status, Quicklink configuration, channel being viewed, and brightness. Keys allow changing channels, day selection, and accessing manual commands.
Navigation: Keys are used to navigate menus and change settings; the "ok" key confirms selections. The key returns to the previous choice level.

Programming a Program:

Creation: Create up to 10 or 20 programs by selecting "+ Add" and editing the program.
Weekly Program Definition: Select outputs to be enabled.
Programming Steps: Add up to 40 programming steps per program.
Action Types: Define action as ON, OFF, PULSE ON, or PULSE OFF.
Trigger Elements:
- TIME: Start sequence at a specific time.
- SUNSET/SUNRISE: Start sequence according to sunset/sunrise times (adjustable difference from -60 min to +60 min).
- LUM: Start sequence according to brightness, requiring an EEN002/EEN003 twilight sensor (adjustable setpoint and symbol).
Day Selection: Associate program steps with specific days or groups of days.
Viewing an Event: Check programmed action type, time, and associated days.
Editing an Event: Modify existing program steps.
Disabling a Program: Disable an entire program.
Deleting a Program: Delete an entire program or individual program steps.

Settings:

Date & Time: Set date, hour, and minutes format (24H/12H).
Wire Input: Configure input type (push button or switch) and associated function (ON/OFF Switch, Contactor, Timer ON/OFF, Forcing ON/OFF).
Daylight Savings Time: Adjust dates and times for daylight savings based on geographical area (Europe, Australia, Custom, No Daylight Savings Time). Custom settings allow relative or fixed dates.
Astro: Precisely define geographic location (latitude, longitude, time zone) to automatically calculate sunrise and sunset times. Modes include Sequential (automatic from sunrise/sunset) and Specific (combining program time periods with sunrise/sunset/brightness thresholds).
Contrast: Adjust the white level of the screen.
Backlight: Set screen brightness and enable/disable backlight (temporarily or permanently).
Language: Select desired language (FRANÇAIS, DEUTSCH, ENGLISH, NEDERLANDS, PORTUGUES, ESPAÑOL, ITALIANA, ΕΛΛΗΝΙΚΗ, SVENSKA).
Changing Settings: Access submenus for Reset BLE, Reset RF links, and Return to product factory configuration.
Bluetooth®: Enable/disable Bluetooth® function.

Manual Commands:

Access: From screen saver, press any key twice to enable backlight, then "ok" to view manual commands.
Options: ON/OFF variance (temporary change, returns to auto mode next step), Forcing ON/OFF (constant control, overrides other commands).

Key Lock:

Enable: Press "ok" and "-" keys simultaneously (> 3 s) until symbol appears. User can only access home screen and view current program/output status.
Disable: Press "ok" and "-" keys simultaneously (> 3 s) until symbol disappears. User can access all screens.

RF Links:

Association: Associate clock outputs (receivers) with Quicklink comfort products (transmitters) via an RF link.
Configuration: Start configuration on transmitter, select input/push button, then select an available clock output and desired function (No function, Contactor, ON, OFF, Scene 1/2, Timer ON, ON/OFF Switch).

Maintenance Features

Reset: Independently reset Bluetooth® and RF link settings or return the product to factory configuration. Accessible via configuration app or locally on the clock.
Firmware Update: Firmware can be updated via the configuration app when a new version is available and the mobile device and clock are connected via Bluetooth®.
Battery:
- Power Reserve: 10 years without any action.
- Type: Non-replaceable and non-rechargeable.
- Low Battery Warning: "Low battery!" message displayed. Product switches to standby within 5 minutes if no key is pressed.
- Critical Battery Level: "Critical battery level!" message displayed. Screen turns off, product stops working, and configuration is no longer possible when off.
Safety Precaution: When connecting the cell or performing any work on it, cut the 230V power supply to the clock.
Disposal: Product must not be disposed of with other household waste. Separate from other waste types and recycle responsibly. Contact retailer or local council for environmentally-friendly disposal. Companies should contact suppliers.
EC Declaration: Complies with Directive 2014/53/EU. Declaration available on www.hager.com.