15
Enter configuration mode by pressing and releasing the cfg pushbutton on the input device.
Tap the input which will control the time switch (output), then continue as required for the device concerned
(EGN100 or EGN200/400) (1).
(1) For more information on inputs, scan the QR Code of one of the time switches at the end of the manual for details on conguration.
The RF link allows the output(s) (A..D) of the time switch (receiver) to be associated with one or more
Quicklink radio comfort devices (input(s)/transmitter).
1
2
9. RF-Quicklink connection
All time switches (output) enter configuration mode.
cfg
To Next Page
Loading...
Need help?
General
