XIBU XL senseFLUID
Replacing the technical package assembly
Request:
Spender ist ohne Funktion
Solution:
Exchange the technical package
Fig. 2
Fig. 1
Open the dispenser with the XIBU key.
Remove the battery compartment from the
dispenser (Fig. 1).
Remove the technical package by applying
pressure to the lock. (Fig. 2 + 3)
Insert new technical package from the top
and press into the lower catch. Pay attention
to clean locking - „click“.
Then reinsert the battery compartment.
Fig. 3
Tools used:
XIBU key
40 | Tips & Tricks | January 2018
To Next Page
Loading...
