110
165
January 2018 | Tips & Tricks | 41
Installation of various XIBU dispensers using two-sided adhesive tape
Adhesive tape,
two-sided, foam/disinf
Article number:
492020140000
SEATCLEANER
senseMOISTCARE
foam
disinfect
Required tape length
440 mm
Process:
1.) Clean the mounting areas (back wall and/or mounting panel in the area where the two-sided
adhesive tape is to be applied and area it is to be glued to) with SPSE cleaning cloth for dis-
pensers.
2.) Leave surfaces to air for approx. 30 seconds
3.) Attach two-sided adhesive tape as shown below
4.) Position the mounting panel and/or back wall and press the gluing areas together (for a mini-
mum of 30 seconds)
tissuePAPER
Adhesive tape, two-sided,
1.6 mm x 20 mm
(20 mm wide, 1.6 mm thick,
on a roll)
Article number: 492020150000
Adhesive tape, two-
sided, seatCLEANER
Article number:
492020130000
To Next Page
Loading...