Haier AU182AFBEA - Cooling Operation; Dry Operation

4
Cooling operation
Press ON/OFF button
Unit starts running.
The previous status appears on the display (except for TIMER, SLEEP mode)
Press MODE button. For each press, operation mode changes as follows:
Select temp. button
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
Every time the button is pressed, temp. setting decreases 1 C
If the button is kept pressed, setting will increase or decrease quickly.
Press ON/OFF button
Unit stops running,and when entry this mode for the next time,it will show the
previous setting.
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically according to the indoor
temperature.
5
3
2
1
Select cooling operation, Shows" " , Cooling operation starts.
Press FAN button. For each press, fan speed changes as follows:
4
Dry operation
Press ON/OFF button
Unit starts running.
The previous status appears on the display (except for TIMER, SLEEP mode)
Press MODE button. For each press, operation mode changes as follows:
Select Drying operation shows" ", Dry operation starts
Select temp. button
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
Every time the button is pressed, temp. setting decreases 1 C
If the button is kept pressed, setting will increase or decrease quickly.
3
2
1
Press ON/OFF button
Unit stops running.
Press FAN,For each press, operation mode changes as follows:
LOW MID HIGH AUTO
AUTO COOL DRY FAN HEAT
LOW MID HIGH AUTO
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically according to the indoor temperature.
Note:
During Auto run operation, temp. setting which can be adjusted will be shown in LCD display, unit will select
heating, cooling or fan operation according to the room temp.
5
ON
OFF
TEMP
HEALTH
FAN
MODE
SLEEP
SWING
CLOCK
TIMER
SET
LOCKLIGHT
RESET
1
2
3
HEAT
POWER/SOFT
5
3
4
AUTO COOL DRY FAN HEAT
>a__WcU[S^ <[c >a`V[e[a`Wc
-91-