Haier AU182AFBEA - Dry Mode; Fan Mode

Dry Mode
Press ON/OFF button
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press, operation mode changes
as follows:
Select Drying operation shows" "
Dry operation starts
Select temp. button
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
Every time the button is pressed, temp. setting decreases 1 C
If the button is kept pressed, setting will increase or decrease
quickly.
Press FAN button. For each press, fan speed changes as
follows:
Press ON/OFF butto nUnit stops running, and when entering this mode
for the next time, it will show the previous setting
Unit runs at the speed displayed on LCD.
In DRY mode, when room temp.becomes 2 C lower than temp. setting,unit will run intermittently at LOW speed
regardless of FAN setting.
3
2
1
4
5
Ultra-low air flow
Temp.setting+2 C
Temp.setting
On reaching 2 C lower than temp.
setting,unitwill run in mild DRY mode.
COOL operation starts when room
temp. is higher than temp. setting.
Fan Mode
Press ON/OFF button
Unit starts running.The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,operation mode
changes as follows:
Select Fan operation shows " ", Fan operation starts.
1
2
Remote
controller
AUTO COOL DRY FAN HEAT
Remote
controller
LOW MID HIGH AUTO
3
Press FAN button. For each press, fan speed changes as
follows:
Unit runs at the speed displayed on LCD.
LOW MID HIGH
Remote
controller
AUTO COOL DRY FAN HEAT
ON
OFF
TEMP
HEALTH
FAN
MODE
SLEEP
SWING
CLOCK
TIMER
SET
LOCKLIGHT
RESET
1
2
HEAT
3
4
ON
OFF
TEMP
HEALTH
FAN
MODE
SLEEP
SWING
CLOCK
TIMER
SET
LOCKLIGHT
RESET
1
2
3
HEAT
5
3
4
>a__WcU[S^ <[c >a`V[e[a`Wc
-99-