Haier AU182AFBJA - Installation Space

Note :
(1). Fix the parts with screws
(2).Don't intake the strong wind directly to the outlet air
-flow hole.
(3).A one meter distance should be kept from the unit top
(4).Don't block the surroundings of the unit with sundries
Installation sketch of outdoor unit
Wind direction
NO
Installation where the area with strong winds.
Install the unit so that the air outlet section of the unit must NOT be faced toward wind direction.
Installation space
L2
L3
L1
500
(Servicing
space)
Air outlet
Air inlet
Air
inlet
Case
Distance
Unit: mm
open
open
open
500
150
150
300
300
0
L1
L2
L3
I
II
III
Power Wiring Terminal
Power Wiring
Distribution Hole
25
780
640
(a) Concrete foundation
(b) Foundation anchor
Fix the unit in a proper way according to the condition of a place where it is installed by referring to the
following .
Installation
Install the unit so that the angle of inclination must be less than 3 degrees.
Anchor bolt
Concrete foundation
Unit
To fix by bolts
Concrete foundation
Unit
Anchor bolt
>a__WcU[S^ <[c >a`V[e[a`Wc
-184-