Haier CFL series - Cleaning Before Use; Electrical Connection

8
English
Cleaning before use
Make sure that you have removed, from the appliance, all the
adhesive strips which restrain the accessories, clean all internal
parts with lukewarm water and neutral soap, vinegar or sodium
bicarbonate, in order to remove the characteristic odour of new
parts, then dry carefully.
Donotusedetergentsand/orabrasivescontainingsoda,or
solvents which could damage the finishes.
Electrical connection
Beforeyouinsert the pluginthe powersocket,make sure
that:
• youhandsarenotwetorhumid;
• voltageandfrequencyontheserialnumberplatematch
thoseofthedomesticpowersupply(aswingof-6%to+6%
ispermittedfornominalvoltage;foroperationatdierent
voltages,useatransformerofadequatepower);
• thecableandplugarenotdamagedorcrushedbyheavy
objects;
• thepowercableisnottootight:extensionstoreachthe
socket are not permitted.
IMPORTANT: do not connect the appliance to rectifiers
(e.g. sun plants) or by an extension lead.
IMPORTANT: the appliance must be connected to an
efficient earth plate.
To this end, if the power socket of the domestic system is
not connected to earth, connect the appliance to a separate
efficient earth system, in compliance with current legal
regulations, consulting a specialised technician.
The Manufacturer declines all and any responsibility if this
accident prevention regulation is not respected.
ThisapplianceconformstothefollowingEUdirectives:
2006/95/CE
2004/108/CE
SODIUM
BICARBONATE