Haier CFL series - Door Reversibility: Mounting Doors from Left

17
English
6
E
7
F
B
8
F
9
C
6B
6A
7A
11B
11C
11A
CLICK!
10
C
11
C
10B
10C
8A
10A
8B
7B
9A
9B
9C
11A
CLICK!
11D
11C
11B
CLICK!
1C
11D
Door reversibility: mounting door from the left
6 A) Re-install thelowerhingeon theleftside, re-fasteningthe
screws.
 B) Re-locatetheapplianceinverticalposition.
7 A) Take the central hinge and, with the help of pliers, unscrew the
pin,turnitupsidedownby180°andre-screwitbackonthe
hinge.
 B) Usinganormalscrewdriver,withdrawthethreehole-coversof
the central cross-piece from the left side and re-install them on
the right side.
8 A)Mountthefreezerdoorontothebottomhingepinandmake
sure the doorstop comes into contact with the hinge. If
otherwise, follow the instructions provided in paragraphs [4C]
and [3C].
 B) Takethecentralhinge,turnitthrough180°,insertitonthe
freezerdoor,andfastenitwiththescrewsontheleftsideof
the central cross-piece.
9 A) Slightlyloosenthescrew(present)onthetopleftsideofthe
appliance.
 B) Taketheupperhingeandturnitupsidedown.
C) remove the pin (now facing up) from the hinge and install it in
its lower part.
10 A) Holdingtherefrigeratordoormakesurethedoorstopcomes
into contact with the middle hinge. If otherwise, follow
the instructions provided in paragraph [3C]. Mount the
refrigerator door onto the middle hinge pin.
 B) ttheupperhingeonthedoorandtakeitclosetothe
locating position of the appliance.
C) Fit the hinge slot on the screw on the left side (loosened in
step9A);securethehingeontheappliance,fasteningtwo
screws on it.
11 A) Click-fit the head (previously removed) on the top side of the
refrigerator door.
 B) Click-tthefrontpanel,applyingpressureonseveralpoints;
 C) secureitwithtwoscrews;
D) fit the clips on the right and left sides (previously removed).