What does OV-G-V01 error mean on a Haier H3PH-1J5K-EU4?
If your Haier Inverter shows the error OV-G-V01, confirm whether the power grid is abnormal and that the AC cable is properly connected. Restart the system and check if the fault persists.
What does OV-Vbatt-H/ OV-BUS-H mean on my Haier H3PH-1J5K-EU4?
If your Haier Inverter displays OV-Vbatt-H/ OV-BUS-H, check if the battery circuit breaker is tripping and if the battery is damaged.
What does OV-ILLC mean on my Haier H3PH-1J5K-EU4?
If your Haier Inverter displays OV-ILLC, check whether the backup load is overloaded. If not, restart the system and confirm if the fault continues.
General| Refrigerant | R32 |
|---|---|
| Weight (Outdoor Unit) | 28 kg |
| Type | Wall-mounted |
| Cooling Capacity | 12000 BTU/h |
| Heating Capacity | 13000 BTU/h |
| Power Supply | 220-240V, 50Hz |
Describes the Haier H3PH Series hybrid inverter, its modes, and applicable models.
Lists all items included in the inverter's packaging for user verification.
Explains safety symbols DANGER, WARNING, CAUTION, and NOTE used throughout the manual.
Provides essential safety guidelines for electrical installations and inverter operation.
Specifies the correct conditions and requirements for safe and optimal inverter usage.
Instructs users on the proper environmental disposal methods for the product.
Details the meaning and function of the inverter's LED status indicators.
Provides criteria for choosing an optimal and safe installation location for the inverter.
Covers inverter mounting guidelines, clearance requirements, and vertical installation.
Details the procedure for connecting the PE (grounding) cable to the inverter.
Explains how to select, prepare, and connect PV input DC cables to the inverter.
Provides instructions for properly connecting the battery power cables to the inverter.
Guides users on connecting AC cables to the inverter's Grid and Backup ports.
Specific steps for connecting the AC Grid Port, including wire stripping and connector assembly.
Specific steps for connecting the AC Backup Port, including wire stripping and connector assembly.
Instructions on how to properly disassemble the AC connectors for rewiring.
Details how to install communication cables and prepare the protective cover.
Instructions for managing the protective cover and cable glands for communication ports.
Defines the purpose and function of each communication port on the inverter.
Guides the connection of the CAN cable for BMS communication.
Explains how to connect the meter using the RS485 interface.
Details the optional DRM port connection for remote shutdown functionality.
Explains DRM port usage for DRED control in specific regions.
Provides guidance on using the RS485 port for external device communication.
Covers the installation of compatible smart meters, including cautions and pin definitions.
Details how to set up remote monitoring via WiFi, LAN, or 4G using the USB COM port.
Lists essential checks and items needed before starting the commissioning process.
Instructs users on downloading and installing the required mobile application.
Step-by-step guide for connecting the inverter to the mobile app via Bluetooth.
Provides a step-by-step guide for safely shutting down the inverter and the system.
To Next Page