Haier HL22K2 - Function

Operation
EN-13 Haier LCD HDTV
your area to the TV's memory. It deletes any channels
on which there is no broadcast or a poor signal. The
channels found are automatically saved.
Channel Skip Y :Press VOL+/ENTER button to enter
the submenu, then press CH+/- button to select
the channel number (eg.2) and press ENTER to
conrm, a mark will be display in the pane as
follows and this channel will be skipped next
time you press CH+/- button but you can press digits
button to select the channel
. If you want to resume
the channel, press ENTER button again.
ChannelSkip
2Analog
3Analog
4Analog
5Analog
5-1Digital
6Analog
7Analog
8Analog
9Analog
10 Analog
Select
Back
EXIT
Set
Video
Audio
Channel
Lock
Function
ENTER
CH+/-
VOL+/-
Channel Labels Y : Allows you to name the channel
that is selected. Press VOL+/ENTER button to
enter the submenu.
ChannelLabel Set
Channel Index
Channel Label
Select
Back
EXIT
Video
Audio
Channel
Lock
Function
1
CH+/-
VOL+/-
Then press CH+/- button to select Channel Index
and VOL+/- button to select the position of the item that
you want to change, afterward press INPUT to input the
numbers and symbols and ENTER button to conrm.
Time Shifting Mode Y : To turn the Time Shifting
Mode on or o.
Set the
A Time Shifting On, then insert the USB drive in
the USB input.
Press
B PLAY/PAUSE to play or pause the program. If
you want to stop time shift function, press the STOP
button.
Channel Menu Options
Channel menu will appear in main menu only in TV
mode.
Press
A MENU button and CH+/- button until the
following menu appears on the screen.
Channel
Video
Audio
Channel
Lock
Function
Select
Back
EXIT
Tuner Mode Antenna
ChannelScan
ChannelSkip
ChannelLabels
Time Shifting Mode On
CH+/-
VOL+/-
Press B VOL+/ ENTER button to enter the menu
and CH+/- button to go up and down to select the
desired option.
Press
C VOL+/ ENTER button to conrm and VOL+/-
button increase and decrease the level to adjust the
selected option to your preference.
Repeat step 2 and step 3 until desired audio quality
D
has been achieved.
Function
Tuner Mode Y :Press VOL+/ENTER button to select
Antenna or Cable.
Channel Scan Y : Press
VOL+/ENTER button to start
to scan, press EXIT to cancel.
Channel Scan
Status:Scanning...Antenna
Analog Channels:4
Digital Channels:3
Cancel
EXIT
40%
Video
Audio
Channel
Lock
Function
All channels now available will be automatically
preset in order .After the search has nished, the
rst program number will display on the screen. This
search automatically adds only the active channels in