Haier HPC12XHR - Remote Control; Remote Control Functions

CONTROL PANEL
ENGLISH
8
REMOTE CONTROL
1. Power On/O
2. Mode
Cool: LED lights when in cooling mode.
Dehumidication: LED lights when in dehumidication
mode.
Fan: LED lights when in fan mode.
Heat: LED lights when in heat mode (applies only to heat
and cool modes).
3. Fan Speeds
Select between multiple fan speeds. Number of fan
speeds vary by model. In dehumidication mode, and
room temperature is greater than 77° F, fan speed can be
adjusted; Otherwise fan speed is xed to “low”.
4. On/O Timer
To set the timer for a 1- 24-hour delay until the air condi-
tioner turns o:
1. When you use the timer setting button while the unit is
operating, you can preset a time for the unit to turn o.
2. When you use the timer setting button while the unit is
on standby, you can preset a time for the unit to turn on.
3. If you press the “ON/OFF” button, the preset timer
function will be canceled.
4. Timer setting range is 1-24 hours.
To clear Timer Delay program:
NOTE: Air conditioner can be either on or o.
1. Press the Timer Button.
2. Press and hold the minus button until the timer display
has cleared.
To change the remaining time (in hours):
1. Press the Timer Button.
2. Press the plus or minus button to change the delay time
from 1 to 24 hours.
3. The new delay time will display.
5. Setting the Temperature
To set the temperature, press the ˅ or ˄ keys to raise or
lower the temperature. The temperature can be raised
or lowered in the cool mode. The temperature cannot be
adjusted in fan or dehumidication mode.
NOTE; The temperature can be set between 61° F to 89° F
(Cool Mode) and 61° F to 77° F (Heat Mode) .
1
2
3
4
5