Haier HRF-628AF6 - Ice Formation & Drain Issues

SERVICE MANUAL
Model: HRF-628AF6/IF6
32
Issue 2013-04-07
REF. Ref1304S001V0
Problem 3: No ice cube
Problem
phenomenon
Checking steps Photo description
no ice cube
1) Open the freezing door, make sure the selecting ba
r
under the storage box is good shape or not stick into the
selecting valve.
2) Disassemble the ice storage box, check if the ice cubes
are stick together. If so, shorten the water time.
Refer to water inlet quantity
setting
3) Set the appliance under ice cube condition, open the
freezing door and press the freezing light button , press
dispenser button. See if the selecting valve works or not. I
f
not, disassemble the delivery motor to see if the plug-in o
f
selecting valve is in place, or the wire of selecting valve is
in good shape.
Problem4:Drain channel icing for 628 series
It has only one defrost heater for 628 series,and has no heater in drain channel,so defrost heater must close to
the drain channel(＜20mm，＞10mm) to heat the drain channel when defrosting.Otherwise it could not heat the
channel.
AGORA - CONFIDENTIAL - AGORA
Downloaded / printed on Agora software : 16/03/2021
by customer : ADEPEM 75010
AGORA - CONFIDENTIAL - AGORA