Domestic Air Conditioner
19
Whether following or avoiding mode is set, the air deflector will oscillate automatically.
(3) If humans in several areas move to one area and no change is detected for 30 seconds
continuously, it will be handled as one person. Power save control function under human perception
mode:
Judge the number of human beings and approximate their activities to ensure energy saving control.
(1) When humans are detected in more than two areas:
Refrigeration: Temperature set remains unchanged.
Heating: Temperature set will decrease by one degree.
(2) When humans are detected in a single area:
Refrigeration: Temperature set will increase by one degree.
Heating: Temperature set remains unchanged.
(3) When two sensors fail to detect any signal within 20 minutes continuously, it will be deemed that
no humans are present and the air conditioner will enter power save mode.
5.1.3.10 10 degree heating maintaining
special heating set function:10 degree heating maintainingDŽ
5.1.3.11 temp display
Default displaying temp is ambient temp, but it can be also changed to set temp via some special
operation.
When receiving the remote control signal, display the set temperature and in the rest time display
the room temperatureˈtemperature is only for referenceDŽ
To Next Page
Loading...
