AUTO SCAN
The channels broadcasted are
automatically scanned and memorized. Only the
receivable channels in the area where this TV is
used will be memorized.
NOTE:
Be sure that antenna or cable is connected properly before plugging the
power cord.
Here describes the case for searching and memorizing channels for DTV/ATV.
1 Press MENU, and then press VOL+/- button to select
CHANNEL menu, then press CH- button to enter.
CHANNEL NO . 2.1
TUNER ANTENNA
SKIP OFF
AUTO SCAN
When scanning is completed, the memorized
smallest channel will be displayed.
When you pressMENU button while scanning, the
scanning is interrupted and the memorized smallest
channel is displayed.
When you pressVOL+ on the remote control,
scanning the channels in both analog and digital
modes will automatically start.
Channel menu
2 Press CH +/- button
to select AUTO SCAN option.
3 Press VOL+ button to start scanning.
14
MUTE
Q.VIEW INFO
INPUT TV/DTV
SAP P.MODE
OK
-
MENU
CH-
CH+
VOL
-
VOL
+
CC SLEEP FAV.LIST
GUIDE
ARC
CH.LIST
EXIT
123
456
789
0
CHANNEL
To Next Page
Loading...
Need help?
General
