How to reduce excessive foam in Haier Washer?
If your Haier Washer is producing excessive foam, it could be due to: * Using an inappropriate detergent, so check the detergent recommendations. * Using too much detergent, so reduce the amount of detergent.
What to do if Haier HW70-BP1439 shows lock error?
If you are experiencing a lock error on your Haier Washer, shut the door properly.
How to fix unbalanced load error on Haier HW70-BP1439?
If your Haier Washer displays an unbalanced load error, check and balance the laundry load in the drum and reduce the load.
How to fix drainage failure in Haier HW70-BP1439?
If your Haier Washer has a drainage failure, it could be due to: * A blocked drain hose, so unblock the drain hose. * The drain hose end being higher than 100 cm above the floor level, so ensure that the drain hose is properly installed.
Why is my Haier Washer machine draining?
If your Haier Washer is draining when it shouldn't, it might be because: * The height of the drain hose is below 80 cm, so ensure the drain hose is properly installed. * The drain hose end could be reaching into the water, so make sure the drain hose is not in water.
What to do if Haier HW70-BP1439 Washer stops before completing wash cycle?
If the operation of your Haier Washer stops before completing the wash cycle, it might be due to a water or electric failure. Check both the power and water supply.
How to stop Haier HW70-BP1439 Washer from strong vibration while spinning?
If your Haier Washer vibrates strongly while spinning, consider these points: * Ensure that all transportation bolts have been removed. * Make sure the appliance has a solid and level position. * Check that the machine load is correct and balanced.
Why is my Haier HW70-BP1439 Washer vibrating so much while spinning?
If your Haier Washer is experiencing strong vibrations during spinning, there could be several reasons: * Ensure that all transportation bolts have been removed. * Make sure the appliance is on solid, level ground. * Verify that the machine load is correct and balanced.
Critical safety instructions for everyday operation and user interaction.
Precautions for safe appliance installation and placement.
Details the purpose and operation of various function buttons like Temp, Speed, Steam.
Managing wash cycles, interruptions, and post-wash actions.
Procedures for cleaning the water inlet valve filter and pump filter.
Explains status codes and common error messages with solutions.
Addresses common operational problems and their resolutions.
Details on connecting the water inlet and drain hoses correctly.
Guidelines for safely connecting the appliance to the power supply.
To Next Page
General
