POWER
The Power switch turns the air conditioner on or off.
THERMOSTAT CONTROL KNOB
This knob controls the temperature of the room.
FAN
Press the SPEED switch to either HI or LOW.
Set the thermostat control to the FAN ONLY setting for circulating without cooling.
NORMAL COOL
Press the SPEED switch to either HI or LOW
Set the thermostat control to the desired temperature setting. If the room is not satisfactory
after a reasonable amount of time, adjust the thermostat control to the appropriate setting to
meet your needs.
MAX COOL
Set the thermostat control to MAX COOL mark.
The air directional louvers let you control the direction of
the airflow. The airflow can be directed left to
right. (See Fig.22)
ENGLISH
STARTING THE AIR CONDITIONER cont.
CHANGING THE AIR DIRECTION
USING YOUR AIR CONDITIONER PAGE 15
Fig. 22
To Next Page
Loading...
