Haier LT32F6 Service Manual

8
10) Input fixed [INPUT MODE FIXED]
Option “VARIABLE”“FIXED”,“AC CTRL”or“AC/RC CTRL”
Default VARIABLE
Function
1. “VARIABLE”: The input source can be changed when power on.
2. “FIXED”: The input source will be changed to the “INPUT MODE START”
setting value when power on.
3. “AC CTRL”: The input source will be changed to the“INPUT MODE
START”setting value when AC-ON.
4. “AC/RC CTRL”: Same as “FIXED” function.
Remarks
11) Hotel mode setting [HOTEL MODE]
Option RESET
Default
Function Reset to the default value in hotel menu.
Remarks Press “OK” key on the remote control to do reset function.
11) Hotel mode setting [HOTEL MODE]
Option “OFF”or“ON”(loop enabled)
Default OFF
Function
OFF：HOTEL MODE is disabled
ON：HOTEL MODE is enabled.
Remarks To active hotel mode.
12) TV TO USB
Option Press
Default
Function
Press the“>”key to do TV TO USB function, it will clone this TV set is setting
and channel data to USB disk. When finish clone, it will display Done.
Remarks
USB flash disk will have two files like “eepdata.bin” and “chdata.bin” when
finish clone.
13) USB TO TV
Option Press
Default
Function
Press the“>”key to do USB TO TV function, it will clone USB disk is setting
and channel data to TV set. When finish clone, it will display Done.
Remarks
USB flash disk must have two files like “eepdata.bin” and “chdata.bin” in root
directory.

Haier LT32F6 Specifications

General

Brand	Haier
Model	LT32F6
Category	TV Receiver
Language	English