Haier LT32F6 Service Manual

7
5) Remote control operation [RC BUTTON]
Option “RESPOND”,“NORESPOND”or“LIMITED”
Default RESPOND
Function
・
RESPOND：The remote control is enabled.
・
NO RESPOND：The remote control is disabled. The POWER key is also
disabled.
・
LIMITED：only (POWER, VOLUME ( / ), CHANNEL ( / ) , ATV,DTV∧∨ ∧∨ ）
key is enabled.
Remarks
6) Touch keypad Operation [PANEL BUTTON]
Option “RESPOND”or“NORESPOND”
Default RESPOND
Function
RESPOND：The touch keypad is enabled.
NO RESPOND：The touch keypad is disable except the POWER key
Remarks
7) Menu operation [MENU BUTTON]
Option “RESPOND”or“NORESPOND”
Default RESPOND
Function
RESPOND：The “MENU” key is enabled.
NO RESPOND：The “MENU” key is disabled.
Remarks
8) OSD display [ON SCREEN DISPLAY]
Option “YES”,“NO”or“LIMITED”
Default YES
Function
・
“YES”, all of the OSD will display.
・
“NO”, all of the OSD will not display.
・
“LIMITED”, only a little of OSD will display.
Disabled
key
・
“NO”：（aspect、Sleep Timer、Menu、EPG、Freeze） OSD will be disable
to display.
・
“LIMITED”：only the (POWER, VOLUME ( /∧∨), CHANNEL
( / ) ,Mute, ATV,DTV∧∨ ，Text）OSD are enabled to display.
(In Text、text, subtitle, subpage, Reveal hidden Teletext, Top/Bottom/Full,
hold、Mute、color is also enable.)
Remarks
9) Start mode [INPUT MODE START]
Option “NORMAL” or “Input source”
Default NORMAL
Function Select the input source when power on.
Remarks
For Example:
“TVA(2)”,“TVD(002TV)”, “AV”, “YPBPR”, “SCART2”, “PC”, “HDMI1”,
“HDMI2”, “HDMI3”, “YPBPR”
TV channel will auto detect the current channel as the input power on source.
If you want to power on at DTV channel 001, you must change the channel to
001 first, then enter hotel mode and set the “INPUT MODE START “item to
TVD (1TV).

Haier LT32F6 Specifications

General

Brand	Haier
Model	LT32F6
Category	TV Receiver
Language	English