Haier SBC20 User Manual

AUX IN
Follow below steps to connect the unit to another audio device like MP3
player and the like:
1. Connect the Audio Out of the device to AUX IN jacks with audio cable.
2. Press STANDBY button to turn the unit on.
3. Press SOURCE button repeatedly to switch the unit to AUX mode.
4. Power on the device and begin playback.
A/V INPUT
1. Connect the A/V jacks to audio&video source, for example, DVD player
with an AV cable.
2. Press the STANDBY button to turn the unit on.
3. Press the SOURCE button repeatedly to switch to AV mode.
4. Use the native controls on the connected audio&video device to begin
playing music through the connected the unit.
5. Audio input signal can only be completed through the Audio Right&Left
Jacks of the A/V Jacks to the unit.
11
English
CONNECTING TO OTHER DEVICES
Composite video output Component video output
A/V input

Haier SBC20 Specifications

General

RMS rated power	20 W
Audio output channels	2.0 channels
Number of full-range drivers	2
Full-range driver diameter (imperial)	3 \
Subwoofer included	No
Cables included	Component, RCA
Receiver included	-
Product color	Black
Apple docking compatibility	iPad, iPhone, iPod
Soundbar dimensions (WxDxH)	508 x 124.96 x 100 mm
HDMI ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Component video (YPbPr/YCbCr) out	1
Power source	AC
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	40 W