EasyManuals Logo

Haier SBC20 User Manual

Haier SBC20
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
POWER SUPPLY
Connect the AC cord to main power.
SLEEP TIMER SETTING
During playback, press SLEEP button repeatedly to select the sleep time
until the desired sleep time showing on the LCD screen.
After finishing the sleep time setting, you can play the unit freely. Once the
sleep time is expired, the unit will be switched off automatically.
HOW TO SET TIME
At standby mode, press CLOCK button once to light up the LCD screen; press
CLOCK button twice, the Hour numbers will flash on the screen, use TUNE
UP/DOWN button to adjust the hour and confirm the setting by pressing CLOCK
button; After, the Minute numbers will start blinking on the screen, press TUNE
UP/DOWN button to set the minutes accordingly, press CLOCK again to confirm
the setting.
Note: The time can only be set at standby mode.
CLOCK SYNC
1. At iPod mode, clock synchronization starts automatically at the first docking
when the unit has been connected to AC power supply. Subsequent to the first
docking, it is necessary to press the T-SYNC button to conduct clock
synchronization (The T-SYNC button only works at power on mode.).
2. At Tuner/iPod/Aux/AV mode, press DISPLAY button to check the current time.
PLAYING YOUR iPod, iPhone, AND iPad
1. Power on the unit. Dock an iPod, iPhone, iPad to the unit, and then press
SOURCE button repeatedly to switch to iPod mode. The playback will start
automatically.
2. Press PLAY/PAUSE button to start or pause the playback.
3. Press STOP button to stop the iPod/iPhone playback.
4. Press NEXT/PREVIOUS button to skip to the next track/ previous track.
5. Press and hold F.BWD/F.FWD button to search through the track
forward/backward.
6. Press MENU button on the remote to return back to the iPod menu, press IPOD
CONTROL MENU UP/DOWN buttons to select your desired track for
playback. Confirm your selection by pressing ENTER button.
7. Press SHUFFLE button to enable or disable the shuffle function.
8. Press REPEAT button repeatedly to cycle through the repeat options (repeat 1,
repeat album and repeat off).
OPERATION
8
English

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier SBC20 and is the answer not in the manual?

Haier SBC20 Specifications

General IconGeneral
RMS rated power20 W
Audio output channels2.0 channels
Number of full-range drivers2
Full-range driver diameter (imperial)3 \
Subwoofer includedNo
Cables includedComponent, RCA
Receiver included-
Product colorBlack
Apple docking compatibilityiPad, iPhone, iPod
Soundbar dimensions (WxDxH)508 x 124.96 x 100 mm
HDMI ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technologyWired
Component video (YPbPr/YCbCr) out1
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)40 W

Related product manuals