Hakko Electronics FM2023-05 - Packing List; Product Specifications

1
1. PACKING LIST
Miniparallelremoverhandpiece............ 1
Tips(T9-I)2pcs/set................................ 1
Heat resistant pad.................................. 1
Cleaning sponge..................................... 1
Heat resistant pad
Iron holder
Mini parallel remover handpiece
Tip (shape-I)
Component bed
Connecting cable
Cleaning
sponge
l
 ApplicableModels
Inordertofunction,theFM-2023mustbeconnectedtotheHAKKOFM-202orFM-206
station.
2. SPECIFICATIONS

MODEL FM-2023 Mini Parallel Remover
Power consumption
Temperature range
Tip to ground resistance
Tip to ground potential
Cord assembly
Length (w/o cord)
Weight (w/o cord)
Standard tip
140W (24 V)
200 – 400°C
< 2Ω
< 2mV
1.2m
75mm (w/o tip)
32g (Handpiece only), 5g (I tip only)
T9-I (Shape-I)
∗ This product is protected against electrostatic discharge.
∗ Specifications and design are subject to change without notice.
TipIDnumberkey.................................. 1
Holderclip(w/screw).............................. 1
Componentbed...................................... 1
CAUTION:
Thisproductincludessuchfeaturesaselectricallyconductiveplasticpartsandgroundingofthe
handpieceandstationasmeasurestoprotectthedevicetobesolderedfromtheeffectsofstatic
electricity.Besuretoobservethefollowinginstructions:
1. Thehandleandotherplasticpartsarenotinsulators,theyareconductors.Whenreplacingparts
orrepairing,takesufficientcarenottoexposeliveelectricalpartsordamageinsulationmaterials.
2. Besuretogroundtheunitduringuse.