Halo Bolt Compact - Page 2

*Fully charge your HALO BOLT COMPACT before first use.
Jump Starng Your Vehicle with the HALO BOLT
COMPACT.
1. Plug the jumper cables into your HALO BOLT and aach
jumper cable clamps to car baery.
- Red clamp on posive terminal (+)
- Black clamp on negave terminal (-)
2. Press the “Jump Start” buon and wait for solid green light.
- Pulsing green light indicates safety checks in progress.
- Solid green light indicates ready to start your vehicle.
3. Start your vehicle.
4. Disconnect jumper cable clamps from car baery.
Charging Your Electronic Devices
1. Connect compable electronic devices to the USB ports to
begin charging.
2. Press the ON/OFF power buon.
Using the LED Floodlight
Press and release the Floodlight ON/OFF buon.
1. The first press will turn on the Floodlight.
2. Second press will turn on the red emergency light.
3. Third press will turn on the SOS flashing red light.
4. Fourth press will turn the Floodlight off.