PLEASE READ BEFORE OPERATING THIS EQUIPMENT
HALO BOLT FLASHLIGHT
Thank you for choosing HALO!
The HALO BOLT FLASHLIGHT is fashionable, feature rich and built for
every day use. This rechargeable ashlight provides a super-bright, LED
beam, dual mode ashlight. Powerful and easy to use, the HALO BOLT
FLASHLIGHT can also safely jump start your car. In addition, you can use
it to charge your phone tablet and other electronic devices. The HALO
BOLT FLASHLIGHT also features a strong magnetic ashlight head with
a convenient multi-mode work and emergency oodlight.
TABLE OF CONTENTS
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Safety Precautions
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT FLASHLIGHT
- Jumper Cables
- USB Type-C Cable
OPERATING INSTRUCTIONS
IMPORTANT: Before using your halo bolt ashlight for the rst time,
fully charge it (so that pressing any button lights up all four LEDS on
the LED Battery Indicators).
To charge your HALO BOLT FLASHLIGHT, connect the provided USB Wall
Charger with the provided USB Type-C Cable. Next, connect the USB
Wall Charger into a wall outlet; and the USB Type-C Cable tip into the
HALO BOLT FLASHLIGHT. The HALO BOLT FLASHLIGHT will
automatically begin charging. When the HALO BOLT FLASHLIGHT is
fully charged, all four battery indicator lights will be solid white. (This
could take up to 7 hours). When fully charged, disconnect the cable.
HALO BOLT FLASHLIGHT LED BATTERY INDICATORS
CHARGING YOUR HALO BOLT FLASHLIGHT
NOTE:
The HALO BOLT FLASHLIGHT is designed to charge between
32°F-113°F (0-45°C). The battery indicators will rapid ash if the HALO
BOLT FLASHLIGHT is attempted to be charged outside of this
temperature range.
USING YOUR HALO BOLT FLASHLIGHT / WORKLIGHT
The HALO BOLT FLASHLIGHT contains a ashlight and work-light. The
LED ashlight has a low and high beam mode. Press the ashlight
power ON/OFF button once to turn on low beam mode. Press the
button a second time to turn on high beam mode.
The Work Light / Emergency Light can be turned on/o by pressing the
Work Light / Emergency Light Power ON/OFF button. The rst press will
turn on the work light. Second press will turn on the red emergency
light. Third press will turn on SOS ashing red light.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT FLASHLIGHT
1. Plug the jumper cables into the jump start output on the
HALO BOLT FLASHLIGHT.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
NOTE:
Do not touch red (positive) and black (negative) clamps together
at any point. If the jump start button ashes red, the jumper cables
have been connected incorrectly. If this ashing red condition
occurs, disconnect the jumper cables from the HALO BOLT
FLASHLIGHT and vehicle battery and restart the process from Step 1.
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT FLASHLIGHT contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT FLASHLIGHT to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
SPECIFICATIONS
Model: HBFL-36630
Battery Cells: 3x Li-Polymer 3300mAh
Battery Pack Energy: 36630 mWh
Jump Start: 12V/400Amps
Input: 5V/2A
USB Output: 5V/2.4A
Dimensions: 2.85 x 10.43 inches
Weight: 1.15 lbs
Operating Temperature (During Charging): 32°F - 113°F (0°C - 45°C)
Optimal Discharging Temperature: -4°F - 104°F (-20°C - 40°C)
Storage Temperature Range: -4°F - 158°F (-20°C - 70°C)
SAFETY PRECAUTIONS
USER MAINTENANCE INSTRUCTIONS
MOVING AND STORAGE INSTRUCTIONS
• Read all instructions before using the product.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT FLASHLIGHT may
cause electric shock to users and damage equipment.
• Keep your HALO BOLT FLASHLIGHT dry and away from moisture and
corrosive materials. The HALO BOLT FLASHLIGHT should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT FLASHLIGHT to moisture, water, rain,
or snow.
• Keep your HALO BOLT FLASHLIGHT away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging device may
present a risk of re or chemical burn if mistreated. Do not expose to
re or excessive temperature. Do not expose to heat above 212°F
(100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT FLASHLIGHT may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT FLASHLIGHT during operation.
• Do not disassemble your HALO BOLT FLASHLIGHT. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT FLASHLIGHT if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT FLASHLIGHT by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
FLASHLIGHT. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT FLASHLIGHT, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT FLASHLIGHT.
• Do not clean your HALO BOLT FLASHLIGHT with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Do not modify or attempt to repair the HALO BOLT FLASHLIGHT except
as indicated in the instructions for use and care.
• Make sure the HALO BOLT FLASHLIGHT’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• The device shall be stored indoors and protected from the elements;
• The unit shall not be charged outdoors;
• When in use, steps should be taken to reduce the exposure to rain, sleet,
snow, and the like
• For appliance and battery storage, do not exceed 104°F (40°C)
• Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, ush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
SAVE THESE INSTRUCTIONS
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
JUMP START TROUBLESHOOTING TIPS
NOTE:
If none of these troubleshooting tips work, please consult a certied
mechanic for assistance.
CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the USB Type-C tip of the supplied USB Type-C Cable into
the USB Type-C input of your electronic device and connect the
Standard USB end of the supplied USB Type-C cable into the HALO
BOLT FLASHLIGHT USB 5V/2.4A Output port.
2. Turn on the USB charging by pressing the USB Power ON/OFF Button
on the HALO BOLT FLASHLIGHT.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274, or
contact us at zagg.com/support.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
To Next Page
Need help?
General
