59
Redhat Linux 9 (Fedora)
The Print Server can work under any Linux-based systems, including Slackware, RedHat,
etc, without any problems.
Basically, the Linux's printing system is based on BSD system. Although many commercial
Linux systems are available in the market and their commands will vary slightly, depending
upon which version is used, the functionality of the Linux-based variants is the same.
1. Make sure that the TCP/IP is well configured on your RedHat system, including network
interface card's driver and IP-related settings (IP address, subnet mask, and gateway).
2. Log in root.
3. Start X-windows by typing startx at the shell mode.
4. Open Printer Configuration.
5. Click New button.
6. Click Forward button.
To Next Page
Loading...