Need help?Do you have a question about the Hamlet HPS01NW and is the answer not in the manual?
General| Product Type | Print Server |
|---|---|
| Model | HPS01NW |
| Brand | Hamlet |
| Power Supply | External power adapter |
| Connectivity Technology | Wireless |
| Data Link Protocol | Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g |
| Network / Transport Protocol | TCP/IP, IPP |
| Remote Management Protocol | HTTP |
| Features | DHCP support |
| Compliant Standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE 802.3u |
| Ports | 1 x 10/100Base-TX |
| Wireless Protocol | 802.11b/g |
| USB Ports | 1 |
| Supported Protocols | IPP |
| Compatible Operating Systems | Windows 2000/XP/Vista/7, Mac OS X |
Provides step-by-step instructions for physically installing the print server.
Guides users through installing the print server driver and PSAdmin utility using the setup CD.
Details how to select an existing printer or add a new one during the setup process.
Details selecting the printer manufacturer and model from driver lists.
Describes how to launch and use the PSAdmin utility for managing print servers.
Guides the user through the TCP/IP wizard to set up IP address, subnet mask, and gateway.
Details TCP/IP settings: obtaining IP from DHCP or specifying a static IP address.
Introduces IPP and details setting up Windows 2000 with IPP service using the Add Printer Wizard.
Guides selecting the correct printer manufacturer and model during the installation.
Configures network type, SSID, channel, transmission rate, and wireless mode.
Details security options like WEP, WPA/WPA2, encryption types, and network security keys.
Explains security types: Disable, WEP (64/128-bit), WPA-PSK, WPA2-PSK encryption.
Guides inputting IP address, subnet mask, and default router for static IP configuration.
Provides detailed steps for installing the print server on NetWare 4.x/5.x NDS Bindery Emulation.
Guides connecting a Macintosh computer via the Chooser to the print server.
Details steps for installing the TCP/IP protocol in Windows network settings.
Guides manual installation of the Network Print Monitor in various Windows versions.
Details adding a network print port, selecting protocol (IPX/SPX, TCP/IP, NetBEUI) and server.
Guides the installation of LPR port printing for Windows NT.
Details adding an LPR printer, specifying server IP and queue name.
Guides standard TCP/IP port printing installation for Windows 2000 and later.
Details configuring the port monitor, selecting LPR protocol, and queue name (e.g., Ip1).
Provides steps for configuring print servers on SCO UNIX and System V Release 4 Unix.
Guides setting up print queues on RedHat Linux 9 using its printer configuration tool.
Details upgrading firmware using PSAdmin or TFTP from Windows command prompt.
Explains firmware upgrade on UNIX using TFTP and via the print server's web interface.
Covers multi-segment LAN issues, protocol, and frame type configurations.
Provides reconfiguration procedures for moving the print server to a different network segment.
Troubleshoots 'arp' command issues, ping/tftp timeouts, and incorrect Node IDs.
Advises on duplicate IP addresses and troubleshooting print servers in segmented networks.
Details modifying configuration files via TFTP for print servers in segmented networks.
Details installing the printer driver from the network after connecting to the print server.
To Next Page