7
Introduction
PITCH BEND
is changes the pitch during playing when the ❺ Instrument
Type is at “Ens” or “Syn.”
⓫ OCTAVE button (P. 14)
Normally the pitch will changed 2 semitones by the [DOWN]
and [UP] buttons.
e pitch will changed 1 octave by Pressing and Holding this
button.
⓬ DOWN button (P. 14)
It lowers the pitch gradually.
⓭ UP button (P. 14)
It raise the pitch gradually.
VIBRATO & CHORUS
⓮ MODE button (P. 17)
e e ect types will selected automatically with ❺Instrument
Types.
TW ..................... It selects the depth of either the Vibrato or Chorus.
Vx, Farf, Ace, Ens
............................ It selects the depth of either the Vibrato.
Syn .................... Selects the depth of either the Delay Vibrato, Wah-Wah or
Pulse Width Modulation.
⓯ ON button (P. 17)
Switches ON and OFF the VIBRATO & CHORUS e ect.
CHORUS / OVERDRIVE
e e ect types will selected automatically with ❺Instrument
Types.
⓰ CHORUS/OVERDRIVE knob (P. 18)
Controls the depth of the e ect.
⓱ ON button (P. 18)
Switches ON and OFF the e ect.
DELAY / REVERB
⓲ DELAY/REVERB knob (P. 18)
Select the e ect types either the DELAY or REVERB and
controls its depth.
⓳ ON button (P. 18)
Switches ON and OFF the DELAY / REVERB e ect.
PATCH
1
2
3
⓴ PATCH buttons (P. 19)
Recalls the Patch to play. e setting will not matched with the
top panel.
MANUAL button (P. 19)
Play with setting on the top panel.
KEYBOARD
Keyboard
49 notes, light-weight keyboard.
VELOCITY AND SOUND ENGINE
The keyboard on this instrument has Velocity
feature for ON and OFF. But sound engine in
this instrument does not change loudness or
timbre by the Velocity.
The Velocity in this instrument is used for
controlling the VMC (Virtural Multi Contact)
when the instrument type is at “TW.”
To Next Page
Loading...
