HAMPTON BAY 58919 User Manual (English)

Questions and Answers:

J
Juan SalasAug 11, 2025
What to do if my HAMPTON BAY Fan will not start?
- J
  jordansaraAug 11, 2025
  If your HAMPTON BAY Fan isn't starting, try these steps: First, check the main and branch circuit fuses or breakers. Next, inspect the line wire connections to the fan and the switch wire connections in the switch housing. Also, verify the battery in the remote control is working. Make sure you are within the normal operating range of 10-20 feet for the remote. Finally, turn off the power supply before checking the dip switch settings.
S
Stephen EllisAug 19, 2025
Why is my HAMPTON BAY 58919 Fan so noisy?
- C
  Chad DayAug 19, 2025
  A noisy HAMPTON BAY Fan can be disruptive. Here's what to check: * Ensure all motor housing screws are snug. * Make sure the screws attaching the fan blade bracket to the motor hub are tight. * Confirm the wire nut connections aren't rattling against each other or the inside of the switch housing. Allow the fan a 24-hour "breaking in" period, as most new fan noises disappear during this time. If you're using a light kit, tighten the screws securing the glassware and check the light bulbs. Also, ensure the canopy has a small gap from the ceiling and that your outlet box is secure with rubber isolator pads between the mounting plate and outlet box.
V
Vincent CoxAug 27, 2025
How to fix a wobbling HAMPTON BAY 58919 Fan?
- J
  Julie GarzaAug 27, 2025
  To address a wobbling HAMPTON BAY Fan, first ensure that all blade and blade arm screws are secure. Most wobble issues arise from unequal blade levels. To check this, measure from a point on the ceiling to the tip of each blade, ensuring any deviation is within 1/8 inch. Run the fan for ten minutes, and if wobbling persists, contact Customer Service for a balancing kit.
J
Joshua MillerSep 3, 2025
How to fix a wobbly HAMPTON BAY Fan?
- C
  casey82Sep 3, 2025
  If your HAMPTON BAY Fan wobbles, here are some potential solutions: * First, check that all blade and blade arm screws are secure. * Most fan wobble problems are caused when blade levels are unequal. * Run the fan for ten minutes. * If the fan continues to wobble contact Customer Service and ask for a balancing kit.

HAMPTON BAY 58919 Specifications

General

Type	Ceiling Fan
Motor Type	AC
Number of Blades	5
Light Kit	Included
Control Type	Remote Control
Blade Color Family	Brown
Blade Material	Wood
Bulb Type	LED
Color Family	Brown
Fixture Color/Finish	Bronze
Indoor/Outdoor	Indoor
Blade Span	52 inches