What to do if my HAMPTON BAY Fan will not start?
If your HAMPTON BAY Fan won't start, begin by checking the main and branch circuit fuses or breakers. Then, inspect the line wire connections to the fan and the switch wire connections in the switch housing, ensuring the main power is off before you do this.
How to fix a wobbling HAMPTON BAY Antigua Plus Fan?
If your HAMPTON BAY Fan wobbles, ensure all blade and blade arm screws are tightened securely. Uneven blade levels often cause wobble. Check blade levels by measuring from a point on the ceiling to the tip of each blade, ensuring any deviation is within 1/8 inch. Run the fan for ten minutes. If the fan continues to wobble please contact Customer Service and a balancing kit will be sent to you at no charge.
Why is my HAMPTON BAY Antigua Plus so noisy?
To address a noisy HAMPTON BAY Fan, ensure all motor housing screws and the screws attaching the fan blade bracket to the motor hub are snug. Also, check that wire nut connections are not rattling against each other or the interior wall of the switch housing, remembering to turn the power off first. If you are using a light kit, make sure the screws securing the glassware are tight and the light bulb is secure. Ensure the canopy is not touching the ceiling and that your outlet box is secure, with rubber isolator pads between the mounting plate and outlet box. Allow the fan a 24-hour “breaking in” period, as most new fan noises disappear during this time.
Ensure fan is mounted to an outlet box marked for fan support using provided screws.
Avoid bending blade brackets and inserting objects in the path of blades.
Remove rubber motor stops before installing blades or testing motor.
Hardware for attaching fan blades.
Hardware for electrical connections.
Hardware for close-to-ceiling mounting.
Additional parts and balancing kit.
List of tools needed for fan installation.
Guidance on selecting and preparing the mounting location.
Procedure for standard ceiling installation using a downrod.
Procedure for close-to-ceiling installation.
Final steps for standard ceiling fan installation.
Final steps for close-to-ceiling fan installation.
Steps for connecting the switch housing to the fan motor.
Procedure to correct fan wobble and ensure smooth operation.
Instructions for installing a light kit onto the fan assembly.
Details of the lifetime warranty coverage for the fan motor.
General| Type | Ceiling Fan |
|---|---|
| Number of Blades | 5 |
| Control Type | Remote Control |
| Bulb Type | LED |
| Dimmable | Yes |
| Reversible Motor | Yes |
| Blade Span | 52 inches |
| Motor Type | AC |
| Light Type | Integrated LED |
| Color Temperature | 3000K |
| Mounting Type | Downrod |
| Light Kit | Included |
| Motor Speed | 3-speed |
To Next Page
