13
Pay attention to the movement of robot when using Teach Pendant.
Don’t enter the safety scope of the robot or touch the robot when the
system is running.
Any collision will release a large amount of kinetic energy, which is
much stronger than the kinetic energy of high-speed and overloading
operations.
Connecting different machines may pose risks or cause new danger. A
comprehensive risk assessment on the whole installation process
should always be carried out. When different safety and emergency
stop performance levels are required, the highest performance level
should always be selected. Always read and understand the user
manual of all the devices used in the installation.
Don’t modify the robot. Any modification of the robot could cause the
unpredictable danger for integrators. The authorized reconfiguration of
robot should be in accordance with the latest edition of all related
service manuals. If the robot is changed or altered in any way, we
refuse to take any responsibility.
Robot and electric control box will produce heat in the operating
process. The robot can cool down after cutting off the power and
waiting for an hour.
Caution：
When the robot is connected or work together with other machines that
may damage the robot, it is strongly recommended that all functions of
the robot and robot program shall be checked separately. It is
recommended to use other temporary road points outside the
mechanical workspace to detect the robot program.
Prevent the robot from being exposed to permanent magnetic fields. A
strong magnetic field can damage the robot.
To Next Page
Loading...
