47
10 Relevant safety directive or standard (CE)
After CE certificated, the truck meets the following directive and standard:
– 2006/42/EC machinery directive (namely Directive of the council of the laws of the member
states concerning machinery), 2000/14/EC Noise Directive (Namely Directive of the council
of the laws of the member states concerning noise radiation of outdoor equipment);
– EN ISO 3691-1:2015+A1:2020 Industrial trucks -- Safety requirements and verification—
Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and
burden-carrier trucks
– EN 16307-1:2020 Industrial trucks. Safety requirements and verification. Supplementary
requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach
trucks and burden-carrier trucks)
– EN1175-1:2020 Safety of industrial trucks - Electrical requirements - Part 1: General
requirements for battery powered trucks）, EN1726-1:1998（Safety standard for machinery
industrial vehicle）, EN1757-2: 2001 harmonized standard;
– Main safety elements are in accordance with 2006/42/EC machinery directive as well as
EN1726-1:1998, EN1175-1:2020, EN1757-2：2001 standard;
– Electronic components design and manufacture meet low-voltage apparatus directive
2014/35/EU;
– Noise is calculated according to EN12053:2001+A1:2008: pallet truck noise, sound pressure
value
Lifting: right ear73.4dB, left ear72.5dB
Going forward: right ear72.4dB, left ear71.5dB
– Vibration data are calculated according to the EN13059:2002+A1:2008 Safety of industrial
trucks - Test methods for measuring vibration, ISO5349-2:2001, ISO2631-1:1997 standard,
meet 2002/44/EC directive: handle vibration amplitude is 0.2977m/s
2
.
Electromagnetic compatibility is calculated according to EN12895:2000 and meet
2004/108/EC directive.
To Next Page
Loading...
