HANGCHA XE Series - Relevant Safety Directives and Standards (CE Models); CE Certification Compliance

75
8.Relevant safety directives and standards (CE models)
The CE certification models meet the following directives and standards: Machinery Directive 2006/42/EC (The
European Council of the Laws of the Member States concerning Machinery), Noise Directive 2000/14/EC
(Directive of the Laws of the Member States concerning Outdoor Equipment Noise Radiation), EN ISO
12100:2010 (Safety of machinery — General principles for design — Risk assessment and risk reduction), , EN
ISO 3691-1:2015+A1:2020, EN 16307-1:2020,
EN 1175:2020, EN 12053:2001+A1:2008, EN 13059:2002+A1:2008, etc.
coordinative standards.

Main safety factors meet Machinery Directive 2006/42/EC,
EN ISO 12100:2010,
EN ISO 3691-1:2015+A1:2020, EN1175:2020, EN 16307-1:2020.

Noise is measured according to EN 12053:2001+A1:2008.
 Vibration parameters are measured according to EN 13059:2002+A1:2008.

Electromagnetism compatibility is measured according to EN 12895:2015 + A1:2019, and meets
2014/30/EU Directive.
 Static test coefficient for lifting attachment is 1.33.
Model
Whole-body
Vibration
m/s
2
Sound pressure
level at the
operator’s position
dB(A)
Sound power level
dB(A)
CPD15-XEY2-SI
CPD18-XEY2-SI
CPD20-XEY2-SI
CPD20-XEXY2-SI
0.68
65
85
CPD25-XEY2-SI
CPD30-XEY2-SI
CPD35-XEY2-SI
CPD30-XEY2H1-SI
CPD35-XEY2H1-SI
0.70
66
86
CPD38-XEY2-SI
CPD38-XEY2H1-SI
0.72
66
86
CPD40/45-XEY2-SI
0.74
72
89
CPD50-XEY2-SI
CPD50-XEXY2-SI
0.75
72
89